ESP8266 UDP通信

#include "driver/uart.h"
#include "espconn.h"void ICACHE_FLASH_ATTR
user_rf_pre_init(void){}struct espconn user_udp_espconn;ETSTimer connect_timer;
ETSTimer test_timer;//udp发送函数
void ICACHE_FLASH_ATTR user_udp_send(void *data)
{
char yladdr[6] = {0};
char DeviceBuffer[40] = {0};//将获取的MAC地址格式化输出到一个buffer里面os_printf("正在发送...\r\n"); wifi_get_macaddr(STATION_IF, yladdr);//查询MAC地址
os_sprintf(DeviceBuffer,"设备地址为："MACSTR"\r\n", MAC2STR(yladdr));//格式化MAC地址
espconn_sent(&user_udp_espconn, DeviceBuffer, os_strlen(DeviceBuffer));
}//udp发送回调
void ICACHE_FLASH_ATTR user_udp_sent_cb(void *arg)
{
os_timer_disarm(&test_timer);
os_timer_setfn(&test_timer, user_udp_send, NULL);
os_timer_arm(&test_timer, 1000, 0);//1秒钟发送一次
}//udp接收回调
void ICACHE_FLASH_ATTR user_udp_recv_cb(void *arg,
char *pdata,
unsigned short len)
{
os_printf("UDP已经接收数据：%s", pdata);
}//创建UDP连接
void ICACHE_FLASH_ATTR wifi_conned(void *arg)
{
uint8 status = 0;
static uint8 count = 0;count++;
os_timer_disarm(&connect_timer);status = wifi_station_get_connect_status();
if(status == STATION_GOT_IP)
{
wifi_set_broadcast_if(STATIONAP_MODE); //设置UDP广播的发送接口
user_udp_espconn.type = ESPCONN_UDP;
user_udp_espconn.proto.udp = (esp_udp*)os_zalloc(sizeof(esp_udp));
user_udp_espconn.proto.udp->local_port = 2525;
user_udp_espconn.proto.udp->remote_port = 1112;const char udp_remote_ip[] = {255,255,255,255}; //用于存放远程IP地址
os_memcpy(&user_udp_espconn.proto.udp->remote_ip, udp_remote_ip, sizeof(udp_remote_ip));espconn_regist_recvcb(&user_udp_espconn, user_udp_recv_cb); //接收回调函数
espconn_regist_sentcb(&user_udp_espconn, user_udp_sent_cb); //发送回调函数
espconn_create(&user_udp_espconn); //创建UDP连接
user_udp_send(NULL);return;
}
else
{
if(count >= 7)
{
os_printf("wifi连接失败！");
return;
}
}os_timer_arm(&connect_timer, 2000, 0);
}//加入当前可用wiff
void ICACHE_FLASH_ATTR scan_done(void *arg, STATUS status)
{
char ssid[] = "Feixun_1003";
char password[] = "12345678";
struct station_config stationConf = {0};if (status == OK)
{
os_memcpy(&stationConf.ssid, ssid, os_strlen(ssid)); //加入当前可用wiff
os_memcpy(&stationConf.password, password, os_strlen(password));//密码
wifi_station_set_config_current(&stationConf);
wifi_station_connect();
os_timer_setfn(&connect_timer, wifi_conned, NULL);
os_timer_arm(&connect_timer, 2000, 0);
}
}void to_scan(void)
{
wifi_station_scan(NULL, scan_done);return;
}//配置ESP8266
void user_init()
{
struct softap_config config = {0};
char ssid[] = "ESP8266";
char password[] = "12345678";uart_init(BIT_RATE_115200, BIT_RATE_115200);
os_delay_us(60000);wifi_set_opmode(STATIONAP_MODE);wifi_softap_get_config(&config);config.ssid_len = os_strlen(ssid);
os_memset(config.ssid, 0, sizeof(config.ssid));
os_memcpy(config.ssid, ssid, config.ssid_len);
os_memset(config.password, 0, sizeof(config.password));
os_memcpy(config.password, password, os_strlen(password));wifi_softap_set_config(&config);system_init_done_cb(to_scan);return;
}