在hyper安装openwrt

写了长长长一篇文章，结果把标签关了，这篇文章就不见了，草稿箱也没有！！！

只好直接copy原来作者的文章了

下载地址

openwrt image

tulip driver

引用

Want to add a openwrt machine in hyper-v for testing?  Sadly, the openwrt did not include the hyper-v device driver for the network device.

(Un)luckily there is a legacy network driver in hyper-v that can be used in openwrt.

Steps to add openwrt machine inside hyper-v:

• In hyper-v, add a machine with 64-128MB ram, legacy network device.
• Copy the openwrt image to the virtual hard disk.
• Mount the virtual hard disk (mount /dev/sda2 /mnt) and copy the tulip driver to the hard disk.
• Boot the openwrt machine.
• Inside the openwrt machine, add the tulip driver (cd /; opkg install kmod-tulip_3.3.8-1_x86.ipk)
• ifconfig -a to check the name of the network device.
• Modify /etc/config/network as usual and restart the network (or reboot).

from：via