Input ANR处理流程

小程序：扫一扫查出行
【扫一扫了解最新限行尾号】
复制小程序

ANR时间区别便是指当前这次的事件dispatch过程中执行findFocusedWindowTargetsLocked()方法到下一次执行resetANRTimeoutsLocked()的时间区间. 以下5个时机会reset. 都位于InputDispatcher.cpp文件:

resetAndDropEverythingLocked
releasePendingEventLocked
setFocusedApplication
dispatchOnceInnerLocked
setInputDispatchMode

简单来说, 上面方法主要是对应以下4个场景,会有机会执行resetANRTimeoutsLocked重置timeout时间:

解冻屏幕, 系统开/关机的时刻点 (thawInputDispatchingLw, setEventDispatchingLw)
wms聚焦app的改变 (WMS.setFocusedApp, WMS.removeAppToken)
设置input filter的过程 (IMS.setInputFilter)
再次分发事件的过程(dispatchOnceInnerLocked)

当InputDispatcher线程 findFocusedWindowTargetsLocked()过程调用到handleTargetsNotReadyLocked，且满足超时5s的情况则会调用onANRLocked().

通过将InputManagerService加入到Watchdog的monitor队列,定时监测是否发生死锁. 整个监测过涉及EventHub, InputReader, InputDispatcher, InputManagerService的死锁监测. 监测的原理很简单,通过尝试获取锁并释放锁的方式.

可通过 adb shell dumpsys input 来查看手机当前的input状态, 输出内容分别为EventHub.dump(), InputReader.dump(),InputDispatcher.dump()这3类,另外如果发生过input ANR,那么也会输出上一个ANR的状态.

其中mPendingEvent代表的当下正在处理的事件.

ANR分类

由小节[3.5] InputMonitor.notifyANR完成, 当发生ANR时system log中会出现以下信息, 并且TAG=WindowManager:

Input event dispatching timed out xxx. Reason: + reason , 其中xxx取值:

窗口类型: sending to windowState.mAttrs.getTitle()
应用类型: sending to application appWindowToken.stringName
其他类型: 则为空.

至于Reason主要有以下类型:

5.1.1 reason类型

由checkWindowReadyForMoreInputLocked完成， ANR reason主要有以下几类：

无窗口, 有应用：Waiting because no window has focus but there is a focused application that may eventually add a window when it finishes starting up.
窗口暂停: Waiting because the [targetType] window is paused.
窗口未连接: Waiting because the [targetType] window’s input channel is not registered with the input dispatcher. The window may be in the process of being removed.
窗口连接已死亡：Waiting because the [targetType] window’s input connection is [Connection.Status] . The window may be in the process of being removed.
窗口连接已满：Waiting because the [targetType] window’s input channel is full. Outbound queue length: [outboundQueue长度] . Wait queue length: [waitQueue长度] .
按键事件，输出队列或事件等待队列不为空：Waiting to send key event because the [targetType] window has not finished processing all of the input events that were previously delivered to it. Outbound queue length: [outboundQueue长度] . Wait queue length: [waitQueue长度] .
非按键事件，事件等待队列不为空且头事件分发超时500ms：Waiting to send non-key event because the [targetType] window has not finished processing certain input events that were delivered to it over 500ms ago. Wait queue length: [waitQueue长度] . Wait queue head age: [等待时长] .

其中

targetType: 取值为”focused”或者”touched”
Connection.Status: 取值为”NORMAL”，”BROKEN”，”ZOMBIE”

另外, findFocusedWindowTargetsLocked, findTouchedWindowTargetsLocked这两个方法中可以通过实现 updateDispatchStatisticsLocked()来分析anr问题.

drop事件分类

由dropInboundEventLocked完成，输出事件丢弃的原因：

DROP_REASON_POLICY: “inbound event was dropped because the policy consumed it”;
DROP_REASON_DISABLED: “inbound event was dropped because input dispatch is disabled”;
DROP_REASON_APP_SWITCH: “inbound event was dropped because of pending overdue app switch”;
DROP_REASON_BLOCKED: “inbound event was dropped because the current application is not responding and the user has started interacting with a different application””;
DROP_REASON_STALE: “inbound event was dropped because it is stale”;

其他: